Features

Simultaneous Power & Power quality measurements

Helpful support functions

Measurement with high accuracy

Remote monitoring on PC and Android device

Various Clamp Current Sensors

Energy consumption check on site

IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V

Simultaneous Power & Power quality measurements

Power/ Harmonics/ Waveform/ Power quality are recorded at all CHs. (Voltage: 3ch, Current 4ch)

Helpful support functions

Quick Start Guide, Wiring check and Sensor detection for easy and reliable measurement

Measurement with high accuracy

Guaranteed accuracy:±0.3%rdg (energy),±0.2%rdg (voltage/ current) Complies with the International Standard IEC 61000-4-30 Class S and the European Standard EN50160

Remote monitoring on PC and Android device

Remote checking of measurement in real-time is possible via Bluetooth communication.

Recorded data can be saved in the supplied SD card.

EN50160 report can be generated after survey by PC software.

Various Clamp Current Sensors

Various types of clamp and flexible sensors are available: from 1000mA Range up to 3000A Range and Earth leakage measurements

Energy consumption check on site Trend and demand graphs for easy recognition. TFT color display with high resolution.

IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V

Power Quality Analyzer General

Wiring connections

1P2W, 1P3W, 3P3W, 3P4W

Measurements and parameters

Voltage, Current, Frequency, Active power, Reactive power, Apparent power,Active energy, Reactive energy, Apparent energy, Power factor (cos θ), Neutral current, Demand, Harmonics, Quality (Swell/Dip/Interruption, Transients/Over voltage, Inrush current, Unbalance rate), Capacitance calculation for PF correction unit, Flicker

Voltage (RMS)

Range

600.0 / 1000V

Accuracy

±0.2%rdg±0.2%f.s. (sine wave, 40 – 70Hz)

Allowable input

1 – 120% of each range (rms). 200% of each range (peak)

Display range

0.15 – 130% of each range

Crest factor

3 or less

Sampling speed of Voltage transient

24µs

Current (RMS)

Range

8128 ( 50A type ) : 5 / 50A / AUTO 8127 ( 100A type ) : 10 / 100A / AUTO 8126 ( 200A type ) : 20 / 200A / AUTO 8125 ( 500A type ) : 50 / 500A / AUTO 8124/8130 ( 1000A type ) : 100 / 1000A / AUTO 8146/8147/8148 ( 10A type ) : 1 / 10A / AUTO 8129 ( 3000A type ) : 300 / 1000 / 3000

Accuracy

±0.2%rdg±0.2%f.s. + accuracy of clamp sensor (sine wave, 40 – 70Hz)

Allowable input

1 – 110% of each range (rms). 200% of each range (peak)

Display range

0.15 – 130% of each range

Crest factor

3 or less

Active power

Accuracy

±0.3%rdg±0.2%f.s. + accuracy of clamp sensor (power factor 1, sine wave, 40 – 70Hz

Influence of power factor

±1.0%rdg (reading at power factor 0.5 against power factor 1)

Frequency meter range

40 – 70Hz

Power supply (AC Line)

AC100 – 240V / 50 – 60Hz / 7VA max

Power supply (DC battery)

Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6 Battery life approx. 3h (LR6, Backlight OFF)

Internal memory

FLASH memory (4MB)

PC card interface

SD card (2GB)

PC communication interface

USB Ver2.0, Bluetooth Ver2.1 + EDR Class2

Display

320 × 240 (RGB) Pixel, 3.5inch color TFT display

Display update period

1 sec

General

Applicable standards

IEC 61010-1 CAT IV 300V, CAT III 600V, CAT II 1000V Pollution degree 2 IEC 61010-2-030, IEC 61010-031, IEC 61326, EN 50160 IEC 61000-4-30 Class S, IEC 61000-4-15, IEC 61000-4-7

Temperature and humidity range

23±5ºC, less than 85% RH (without condensation)

Operating temperature & humidity range

0 – +45ºC, less than 85% RH (without condensation)

Storage temperature & humidity range

-20 – +60ºC, less than 85% RH (without condensation)

Power supply (AC Line)

AC100 – 240V / 50 – 60Hz / 7VA max

Power supply (DC battery)

Alcaline size AA battery LR6 or Ni-MH (HR-15-51) × 6 Battery life approx. 3h (LR6, Backlight OFF)

Dimensions

175(L) × 120(W) × 68(D) mm

Weight

Approx. 900g

Included Accessories

7141B (Voltage test lead) 7170 (Power cord) 7219 (USB cable) 8326-02 (SD card 2GB) 9125 (Carrying case for KEW 6315) 9135 (Carrying case for KEW 6315-03) Input terminal plate × 6, KEW Windows for KEW 6315 (software), Quick manual, Alkaline size AA battery (LR6) × 6

Optional Accessories

8124, 8125, 8126, 8127, 8128 (Load current clamp sensor) 8129, 8130 (Flexible clamp sensor) 8146, 8147, 8148 (Leakage and Load current clamp sensor) 8312 (Power supply adaptor) 9132 (Magnetci carrying case)