Machine Craft-Mumbai,

Machine Craft

505, Palm Spring, Above Croma, Malad Link Road, Malad West,,
Near D Mart, Mumbai, - 400064 (Maharashtra)
9820028340
www.machinecraft.org
x

Products

Thick Sheet Machines

Thick Sheet Thermoforming Machines
Thick Sheet Thermoforming Machines
Machines Made for Making Plastic Products using Vacuum & Pressure Forming
PF1 Series
PF1 Series
The PF1 Series has been designed to form thick sheet products using vacuum & pressure forming...
Sheet Loading System
Sheet Loading System
The Vacuum forming process starts as the operator loads a thermoplastic sheet made from mater...
Automatic Sheet Loading Option
Automatic Sheet Loading Option
Autoloader add-on allows automatic sheet loading. This variant loads a stack of cut sheets in...
Roll Feeder Option
Roll Feeder Option
The Roll Feeder add-on is a handy feature that is used for thin sheet materials that come in ...
Mould Platen System
Mould Platen System
Pneumatic Mould Platen System In this option, four cylinders, synchronised by four rack an...
Servo Driven Mould Platen System Option
Servo Driven Mould Platen System Option
This add on facilitates faster mould movement by reducing the distance between the tool and t...
Quick Mould Change System
Quick Mould Change System
The option for Quick Mould Change technology is available on select models. Quick Mould Chang...
Motorised Frame Add-on
Motorised Frame Add-on
The PF1 Series comes with adjustable top clamping frames. As an option, the PF1 series al...
Plug Platen System
Plug Platen System
All machines are equipped with Pneumatic Plug Platen Movement with Stroke Adjustment.
Plug Platen with Motorised Stroke Adjustment option
Plug Platen with Motorised Stroke Adjustment option
Plug Assist can be provided with a Motorised Stroke Adjustment Plate so that you can use the ...
Heating System
Heating System
Sandwich Heating The PF1 series features both, single and sandwich heating systems (with t...
Heating Elements
Heating Elements
The system features Infrared Ceramic Heating Elements by default. The machines also come wit...
Sensors
Sensors
Preblow The photo sensor senses the height of the pre-blow sheet and regulates the air in ...
Sag Control
Sag Control
During the heating of sheet the sagging of sheet is controlled by photocells mounted below th...
Sheet Cooling
Sheet Cooling
All Machines are equipped with high speed cooling blowers for efficient cooling of formed par...
HMI
HMI
All machines come with a touchscreen Human Machine Interface with a friendly and simple to us...
Technical Specifications
Technical Specifications
PF1 machines are available in a variety forming area and stroke options. These machines can a...

Thin Sheet Machines

Thin Sheet Thermoforming Machines
Thin Sheet Thermoforming Machines
Machines designed for the packaging industry to process thermoplastic sheets such as PP, PET,...
AM Series
AM Series
The AM Series is a starter range vacuum forming machine. The machine is a standalone vacuum f...
Roll Feeding System
Roll Feeding System
Sheet Roll is to be manually placed on the chain when you first load the machine. The sheet i...
Heating System
Heating System
The machine comes with a single heater with infrared ceramic elements. The heating system is ...
Forming System
Forming System
The machine has 2 Pneumatic Cylinders that drive the forming platen. The mould lies on the fo...
Chain Adjustment System
Chain Adjustment System
The machine indexes the sheet automatically as per the set timer using the Servo Driven chain...
HMI
HMI
Machines come with a simple Human Machine Interface to adjust timings on the machine
Pneumatic Shear Add-on
Pneumatic Shear Add-on
Optional pneumatic sheer can be added on the machine to cut the sheet.
Hydro-Pneumatic Press Add-On Module
Hydro-Pneumatic Press Add-On Module
The formed parts from the AM Machine can be individually cut using a hydro-pneumatic punching...
AM-Ex Series
AM-Ex Series
The AM Series also comes in a special CE Standardised Automatic Vacuum Forming version.In thi...
Technical Specifications
Technical Specifications
Technical Specifications
INLINE Series
INLINE Series
Form, Punch, Hole, Stack - 3/4 Station Continuous Production Thermoforming Machines with Vacu...
Pneumatic Version
Pneumatic Version
The forming station is driven by pneumatic cylinders, punching station is servo driven and st...
Servo Version
Servo Version
The Servo version has the forming station is driven by servo motors, punching using servo mot...
INLINE Series
INLINE Series
The INLINE Series has been designed to form thin sheet products using vacuum and pressure for...
Roll Feeding Unwinder System
Roll Feeding Unwinder System
Thin Sheet Roll is placed on the unwinder system which automatically unwinds the sheet roll a...
Chain Feeding System
Chain Feeding System
Film enters the in-feed section from the unwinder section. Edge of the film is heated before ...
Sandwich Heating Station
Sandwich Heating Station
Top & Bottom Heaters with Infrared Ceramic Elements are attached on the machine. Heaters a...
Forming Station
Forming Station
The Mould is placed on the Forming Platen. The Forming Platen are Pneumatically driven as per...
Hole Punch Station
Hole Punch Station
This station is optionally available for punching holes useful for applications such as punne...
Punching Station
Punching Station
The Punching Unit follows the Forming System. Servo Motor driven steel-rule punch press is fi...
Stacking Station
Stacking Station
The stacking unit is pneumatically driven. After Punching, the parts are down stacked on a co...
Trim-winding Station
Trim-winding Station
The trim-winding Station winds the left-over plastic sheet trim after punching. The trim-...
Technical Specifications
Technical Specifications
Technical Specifications

Others Machines

PF2 Series
PF2 Series
The PF2 Series has been designed to form thick sheet products using vacuum forming technology...
Sheet Clamping
Sheet Clamping
The Thermoplastic cut sheet is manually loaded by the machine operator onto the machine. The ...
Heater Movement
Heater Movement
The Heater Box then moves forward to start heating the thermoplastic sheet upto the set tempe...
Mould Platen Movement
Mould Platen Movement
Once the sheet is heated to the desired temperature, the heater box moves back and the Mould ...
Technical Specifications
Technical Specifications
Technical Specifications
SAM Series
SAM Series
The SAM Series has been designed to form thick sheet products using vacuum forming technology...
Technical Specifications
Technical Specifications
Technical Specifications
MF Series
MF Series
Floor Standing Vacuum Forming Machine made for prototyping labs, universities and DIY Maker C...
Machine Modules
Machine Modules
Thermoplastic Sheet is loaded manually onto the forming bed.
TFM Series
TFM Series
The TFM Series has been designed to form thin sheet products using pressure forming technolog...
Technical Specifications
Technical Specifications
Technical Specifications
Special Purpose Vacuum Forming Machines
Special Purpose Vacuum Forming Machines
This is a special purpose Vacuum forming machine of forming area 600 mm x 600 mm to manufactu...
CNC Router- Model C1
CNC Router- Model C1
Machinecraft's CNC Router's can help you to trim your thermoformed parts into final shape. Th...

Moulds

THERMOFORMING MOULD MAKING
THERMOFORMING MOULD MAKING
Thermoforming mould making is a process used by manufacturers to produce thick sheet products...
Machined Porous Aluminium Moulds
Machined Porous Aluminium Moulds
Machinecraft offers Machined Porous Aluminium Moulds - ALWA POR - which are moulds made from ...
Moulds Manufactured at Machinecraft
Moulds Manufactured at Machinecraft
Moulds Manufactured at Machinecraft

Sheets

THERMOPLASTIC SHEETS
THERMOPLASTIC SHEETS
Thermoforming is a 2-step process; the first step is to load a thermoplastic sheet on the mac...
Polycarbonate opaque: MAKROTECH™
Polycarbonate opaque: MAKROTECH™
Opaque polycarbonate (PC) is a virtually unbreakable material for the toughest environments. ...
Polycarbonate Recycled: RPC™
Polycarbonate Recycled: RPC™
Arla Plast offers recycled opaque PC sheets with different surface structures, with or withou...
ABS/PMMA Material
ABS/PMMA Material
ABS/PMMA Material
HIPS/ABS/HDPE Material
HIPS/ABS/HDPE Material
HIPS/ABS/HDPE Material

About

We make plastic processing machinery in Mumbai, India for Thermoforming, Vacuum Forming, Sheet Extrusion and Packaging industry since 1976. We are a family run company with focus on operational efficiency and technological advancement in our machines. Machinecraft has more than 2000 installations all over the world. Our machines are running successfully in 35 countries, globally.

Photos

Contacts

Machinecraft

Machinecraft

505, Palm Spring, Above Croma, Malad Link Road, Malad West, Mindspace, Malad West, Maharashtra
Near D mart, Mumbai - 400064
9820028340
www.machinecraft.org
Contact Person: Machinecraft

Get in Touch

Conatct Person
Machine Craft

9820028340